Making the New Water Heater Last

On a boat, particularly in a salt water environment, a lot of corrosion occurs. We usually do what we can on a boat to prevent, or at least delay, the corrosion.  We use materials that are resistant to corrosion, we paint things, and we even use replaceable sacrificial metals to protect other metals.  Well...most of the time anyway...

If you recall in January when I returned to the boat, one of the items I had to replace was the water heater as it had developed a leak.  Well, I ordered one and did the replacement and have to say I've been happy with the results.  Hot running water is a nice thing to have...particularly for washing dishes and taking showers.  And I hadn't really thought of it much until a discussion on the longevity, or lack thereof, of boat water heaters occurred on the Leopard owners Facebook group.  The original poster was wondering...or complaining...about how he was only getting a couple years out of replacement water heaters.  And, of course, the heater he mentioned was the same one that I had just installed.  The usual types of replies about favorite brands and/or how nothing was made well anymore occurred, and then there was one reply that made me think...well duh, why hadn't I thought of that.

A sacrificial anode for the water heater. that
is made by the same company

Even cheap residential water heaters at the local big-box hardware stores come with sacrificial anodes installed.  Why on earth doesn't the boat water heater have one.  We have sacrificial zincs on propellers and propeller shafts, in engine cooling systems, on outboard motors, and just about any other piece of metal that touches the water.  But unlike every house on land, these water heaters don't seem to come with a sacrificial anode.  I guess that is why the boat water heater has a one year warranty when, for about the same price, a residential water heater comes with a 6 year warranty.  Well, as it turns out, you can actually buy a sacrificial anode rod for a boat water heater.  So, not wanting to go through replacing the water heater again in a couple years, I did.

Out with the old...

Since the boat water heater doesn't have a dedicated mounting location for the anode, they are designed to replace the existing drain valve on the water heater.  It was a bit of a pain to remove the plastic drain valve (it would have been much easier if I had known to do this before I installed the water heater...which is why I'm telling you about it now) as there is limited clearance with all the connections on the front.  Installing the anode with the integrated drain valve is easier.

...in with the new.

While it may look like the drain valve is much smaller now, the actual opening inside that plastic valve is not much, if any, larger than on the replacement petcock. So I'm sure it will drain equally as slow either way.  Hopefully this $16 addition will extend the life of my new water heater by a few years.